Mitsubishi M70 series

Appearance of  cnc  monitor

this picture below are one of cnc monitor with brand Mitsubishi M70

there are many kind of cnc monitor, but this monitor Mitsubihi M70 which one i'll write on this post

this monitor consists of display unit and setting unit,keys and also menu keys, that I will ilustrated below

on the setting keys there were some of button such as :

·Reset key

·Cursor keys

·shift key

·Input key

·Data correction key

·Function selection keys

·Alphabetic and Numerical character and symbol keys

 if u want to enter the letter or symbol on the lower of alphabetic or lower of number key, just press the corresponding key while holding down the SHIFT key

for example you want to enter K on your monitor, just holding down the SHIFT key and type letter R

With buttons that are explained above, you can easily execute Manual and numeric command included Spindlle rotation , Tool, and M function , by operation on the screen, in shortly you can key S for spindle, T for tool, and M for miscellaneous function

for example I want to rotate the spindle with 2000 rpm and clockwise rotation

here some instruction to do it

press the S key

when press this key, the screen with this value will be highlighted, and sett the numerical value by number key, in this sample I press 2000. and the sett number are displayed as highlighted

the spindle now ready for the next command, are u want to rotate it?

 Just look at the alphabetic keys and find M button, so the screen with this value will be highlighted and ready for the next command, look again on the numerical keys and press 0 & 3 if u want to rotate it Clock wise and press 0&4 if u want to rotate the spindle Counterclockwise..

and then press

the spindle will be rotated as you commanded, and the reserved display on screen returns to normal

so before you execute this function, you must understand miscellaneous Function ,in shortly you must understand M code , look back on this blog, there are already have article about M code

you also can call the tool you want to open or u want to setting the value parameter of cutter, by pressing T button

ater the T value on screen already highlighted, press the next command by entering number tool that you want to call, and press Input key, so the tool on machine magazine will be rotate and ready for tool change into spindle

thanks for read :)
my tired finger need a break, and took the cofee